山東創圖建筑裝飾工程有限公司
18660816658
您當前位置: 廚房防火板怎么貼才會不起泡
來源：http://www.0473114.cn/ 日期：2022-08-19 發布人：admin
廚房防火板是大家為了保障廚房的使用安全，降低危險隱患而經常選用的一類裝修材料。畢竟在煙火氣十足的廚房之中，火災發生的可能性還是比較大的。那么廚房防火板怎么貼才會不起泡呢？富美家防火板小編為您分析問題。
Kitchen fireproof board is a kind of decoration material that is often used to ensure the use safety of the kitchen and reduce the hidden dangers. After all, in the kitchen full of smoke and fire, the possibility of fire is relatively large. So how can the kitchen fire board be pasted without foaming? Fumeijia fireproof board editor will analyze the problem for you.
廚房防火板怎么貼
How to paste the fire board in the kitchen
1、在正式準備粘貼防火板之前，大家一定要注意對黏貼區域的灰塵和污漬進行清掃。因為如果有灰塵會導致膠水的粘度降低，在粘的時候就不會那么牢固。
1. Before formally preparing to paste the fireproof board, we must pay attention to cleaning the dust and stains in the pasting area. Because if there is dust, the viscosity of the glue will be reduced, and it will not be so firm when it is stuck.
2、涂抹萬就膠水，切記千萬不要再涂抹完膠水以后就馬上粘防火板，一定要等膠水先防止20分鐘左右之后，再將防火板放在上面進行粘攆，要注意邊粘邊壓。
2. When applying wantu glue, remember not to stick the fireproof board immediately after the glue is applied. After the glue is prevented for about 20 minutes, put the fireproof board on the top for gluing and pressing, and pay attention to gluing and pressing at the same time.
3、粘完了的防火板并不說馬山就完工可以進行使用了，還需要在防火板的表面放置一些重物壓住，在12個小時以后就差不多完成了后的安裝了。
3. The bonded fire-proof board is not ready for use after the completion of Mashan. It also needs to put some weights on the surface of the fire-proof board to press it. After 12 hours, the installation is almost completed.
防火板為什么會起泡
Why does the fireproof board bubble
1、在涂膠水的時候沒有將繳稅進行放置或者放置的時間不長，使得膠水中含有的一些有機溶劑沒有被完全的揮發，在粘貼防火板的時候就會有空氣聚集在里面，久而久之就形成了起泡。
1. When the glue is applied, the tax is not paid or the time is not long, so that some organic solvents contained in the glue are not completely volatilized. When the fireproof board is pasted, air will gather in it, and bubbles will form over time.
2、防火板在粘貼的時候沒有壓實，導致膠水與防火板之間還存在空氣，這些空氣聚集在內部無法流通所以就形成了防火板的起泡。
2. The fireproof board is not compacted when it is pasted, resulting in air between the glue and the fireproof board. These air are collected inside and cannot circulate, so the blistering of the fireproof board is formed.
防火板起泡了怎么辦
What should I do if the fireproof board foams
1、在施工的時候一定要充分晾膠，這是在根源上就杜絕起泡的可能性，晾膠充分到位了之后在粘貼的防火板一般是不會起跑的。
1. During construction, it is necessary to fully air the glue, which is to eliminate the possibility of foaming at the root. After the glue is fully in place, the fire-proof board pasted will not start.
2、如果已經粘貼了防火板，想要解決起泡的問題就可以在防火板的地步鉆一些小洞用來透氣，讓空氣之間的對流可以順利一些。
2. If the fireproof board has been pasted, if you want to solve the problem of foaming, you can drill some small holes at the bottom of the fireproof board for ventilation, so that the convection between the air can be smooth.
3、對待已經起泡的防火板可以用熱的電熨斗加上濕毛巾進行熨燙，溫度保持在50~60℃即可。
3. The foamed fireproof board can be ironed with a hot electric iron and a wet towel, and the temperature can be kept at 50 ~ 60 ℃.
廚房防火板怎么貼才會不起泡？以上就是問題的相關解答了，您對此有什么不了解的話歡迎關注我們網站http://www.0473114.cn，咨詢了解更多。
How can the kitchen fireproof board be pasted without foaming? The above is the relevant answer to the question. If you don't know anything about this, please follow our website http://www.0473114.cn Yes, consult to learn more.
上一篇：冰火板基材原理以及鑒別方法
下一篇：加工抗倍特板過程中的幾點注意事項
分類導航
Related products相關新聞
產品銷售熱線：18660816658
技術方案咨詢：18560211715
倉庫地址：山東省濟南市天橋區金鑫產業園303倉庫